• Dektec Digital Video Bv Network & Wireless Cards Drivers
• Dektec Digital Video Bv Network & Wireless Cards Drivers

The DTU-245 FantASI is a compact USB-2 adapter for capturing and generating DVB-ASI and SDI streams. Features: Convenient, compact USB adapter that can be used to capture and generate MPEG-2 transport streams (DVB-ASI) and uncompressed serial digital video (SDI). Essential Tools for Digital Video Professionals March 2011 www.dektec.com RF Monitoring and Analysis Software Real-time RF analysis on your laptop DVB-T measurements with DTU-235 QAM and 8-VSB probing with DTU-236 FEATURES Real-time analysis of modulated digital TV signals using DTU-235 or DTU-236 USB-2 RF probe. Enabling PCs for Broadcast For over 20 years, DekTec provides digital-TV professionals with PC add-on cards, USB devices, network appliances, and a variety of software. The devices and applications are used for Test and Measurement and to build smart solutions with servers, desktop PCs, laptops and tablets.

• Description
• Specifications
• Ordering Info

Network management SNMP v2c Discovery WS-Discovery ORDERING INFORMATION Description E -3137 Networked DVB S(2) receiver DTE-3137 SX 3137 with StreamXpert® Please refer to www.dektec.com for the latest pricing and a list of distrib-utors and resellers. © 2010 - 2012 DekTec Digital Video BV Page 1/18 DTC-379 C2Xpress Manual Essential Tools for Digital-TV Professionals June 2012 DTC-379 C2Xpres.

Description

DTA-112 Features

• Cost-effective variant of DTA-115 with support for ATSC, QAM-A/B/C and DVB-T
• All-channel upconverter 47 . 862MHz covering entire VHF and UHF band
• Output amplifier with programmable 0 . 31.5dB attenuator in 0.5dB steps
• Supports all constellations and modulation modes for each supported standard
• Bi-directional DVB-ASI port
• Monitor output for direct connection to the antenna input of a digital receiver
• Programming interface (DTAPI) is fully compatible with other DekTec digital-video output adapters
• PCI rev 2.2, 32 bit, 33 or 66 MHz bus

DTA-112 Applications

• Driving set-top or handheld receivers for demos, at shows, in electronics stores, for software development, repair, production testing or performance testing
• Signal validation: check out whether your receivers can handle a new transport stream
• Create your custom application with direct RF output

PC Requirements

• Core i5 minimum, Core i7 recommended, or equivalent AMD CPUs
• Win 2k8/2k12/2k16, 7,8,10 or Linux ≥2.6.18, 3.x, 4.x

Block Diagram

Specifications

Ordering Info

All USA orders will be shipped from our USA warehouse.

All other orders will be shipped from Canada.

DTA-112 – ATSC/DVB-T/QAM VHF/UHF modulator for PCI bus

DTA-112-SP – ATSC/DVB-T/QAM VHF/UHF modulator for PCI bus with StreamXpress player software

DTA-112-SXP – ATSC/DVB-T/QAM VHF/UHF modulator for PCI bus with StreamXpert and StreamXpress player software

Software Description

1. StreamXpress – Playout Software

• Low-cost, high-performance playout software that supports all DekTec output adapters
• Endless play with optional automatic correction of continuity-counter, PCR/PTS/DTS and TDT/TOT fields
• SOAP-based remote control to automate StreamXpress operations (DTC-302-RC option)
• Saving and restoring playout parameters using XML-based settings file
• Reproducible injection of errors in the transport stream with adjustable error rate
• Easy-to-use control of modulation and channel simulation parameters

2. StreamXpert – Transport Stream Analyser Software
• Real-time analysis, monitoring and recording of MPEG-2 transport streams
• Recording based on duration, size or manual
• Provides detailed statistics on the PIDs, services and tables found in the transport stream
• Displays PIDs, services, tables, descriptors, stream information and PID-grid (compact overview of all PIDs)
• User definable TR 101 290 templates
• PCR analysis
• Measurement of bitrates, PCR-accuracy and interval
• Integrated SD/HD video and audio decoder with support for MPEG-2, AVC/H.264, HEVC/H.265, AVS, 4:2:2 and 10 bit video streams and MP1 / MP2 / (HE-)AAC / Dolby AC3 / Dolby AC4 audio
• Deep decoding of PSI, DVB-SI, DVB-RCS and ATSC-PSIP tables and descriptors
• Closed captions decoding
• SI decoding with user templates, Dolby AC4 analysis, multi-monitor support
• Support for analysing TS-over-IP streams via a DTA-2160 / DTA-2162 or a local network port
• The world’s most cost-effective and user-friendly transport-stream analyser

AdvancedDigital Inc. is proud to be one of the largest distributors of DekTec equipment and analysis software.

Based out of The Netherlands, DekTec is an established manufacturer of high quality equipment, software and API’s developed towards the broadcasting R&D industry. Operating for over 15 years DekTec has positioned itself as a trusted source of quality hardware and software, supporting many digital video and modulation standards such as 8VSB, DVB-T/H/T2, DVB-C, DVB-S/S2, and many others.

DekTec specializes in PCI cards (PCI express) and USB2 VHFUHF modulators, transport stream analyzers and input/output adapters for capture and processing real time digital streams.

Additionnaly, DekTec offers several standalone network appliances, such as the DTE-3100/3120,that are used by thousands of customers as ip converters into ASI as well as ASI-to-IP.All of DekTec’s products come included with advanced playout and analysis software,as well as the Matrix API®.

AdvancedDigital Inc. has been DekTec’s partner for numerous years offering fast service, excellent support and competitive pricing.All orders to the US and Canada are eligible for free shipping.

DTA-2178-ASI Eight Channel Bidirectional ASI Input/Output Card

A low cost 8-channel ASI input/output low profile PCI card. Applications Record and store transport streams from DVB-ASI Analyse and monitor TS signals incoming from the DVB-ASI channels Playout TS files for DVB-ASI output Multiplex […]

DTA-2132 – High-end satellite receiver for PCIe

Professional-grade satellite receiver
DVB-S2/S2X up to 256APSK and 72Mbaud
Full-quality reception and RF metrics

DTA-2195 – 12G-SDI I/O Adapter with HDMI 2.0 Monitor Output

Protoss electronic laboratory port devices driver downloads. 12G-SDI input port, 12-G SDI output port
1 Genlock input
HDMI 2.0 monitoring output
Capturing and processing uncompressed 4K-UHD

DTA-2179 – DekTec Twelve 3G-SDI/ASI ports for PCIe

12 ports HD/SD-SDI adapter for PCI Express with genlock input.
Each port can be configured as input or output, and as ASI, SD-SDI or HD-SDI, in any combination.
Processing of a mix of HD/SD-SDI and/or ASI signals.
HD/SD-SDI monitoring, recording and/or play-out

DTA-2182 – DekTec Dual H.264/MPEG-2 HD/SD Encoder for PCIe

Video encoding: 480i, 576i, 720p, 1080i, 1080p
Video Inputs: 2 HD/SD-SDI
Audio encoding: MPEG-1 Layer II, AAC, Dolby Digital
Output: ASI, IP

DTU-351 – HD-SDI Input Adapter for USB-3

Convenient, compact USB-3 adapter that can be used to capture, record and analyze uncompressed serial digital video (SDI).
Supports HD-SDI and SD-SDI.

DTU-315 – All-standard all-band modulator for USB-3

DTU-315 is a USB-3 based all-standard all-band modulator

DTA-2174 – DekTec Quad 3G-SDI / ASI input or output for PCIe

DekTec’s bi-directional quad ports ASI/SD-SDI/HD-SDI and 3G-SDI adapter, with support for both level A and level B, bi-level and tri-level genlock; also with support for 4K and with an on-board hardware video scaler.

DTA-160 – DekTec GigE + 3x ASI ports for PCI

Gigabit Ethernet 10/100/1000 port. Three bi-directional DVB-ASI ports. Transcoding between ASI and TSoIP.
Transmission and reception of Transport Streams over IP networks.

DTA-145 – ASI/SDI Input+Output Adapter with Bypass Relais for PCI Bus

Two independent ASI/SDI ports: Input + Output or Dual Output (software-selectable)
Each port can carry either DVB-ASI up to 214Mbps or full-frame 10-bit SDI
Low Profile or Standard PCI

DTA-2142 – DekTec Serial and Parallel Port for PCI Express

Parallel port: Multiple modes, input or output, clock up to 108MHz
Serial port: ASI or SDI, input or output, software selectable

DTA-2115B – DekTec All-Standard VHF/UHF/L-Band Modulator for PCI Express Bus

High-end test modulator for PCI Express with support for every popular digital TV and digital audio modulation standard.
Wideband upconverter 32…2186MHz, fully agile over VHF, UHF and L-band.
Supports modulation standards: ATSC VSB, ATSC-3.0, DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2 SPLP, QAM-B, QAM-C, ATSC-M/H, CMMB, DAB(+), DTMB, DVB-C2, DVB-S2X, DVB-T2 MPLP, ISDB-S, ISDB-T, ISDB-Tmm, T-DMB

DTA-2154 – DekTec Quad-Port HD/SD-SDI/ASI Adapter with Genlock

Quad-port HD/SD-SDI adapter for PCI Express with genlock input.
Each port can be configured as input or output, and as ASI, SD-SDI or HD-SDI, in any combination.
Processing of a mix of HD/SD-SDI and/or ASI signals.
HD/SD-SDI monitoring, recording and/or play-out

DTU-238 – DekTec DVB-T2/T/C, ISDB-T and ASI Probe for USB-2

Portable RF analysis and monitoring Additional ASI Transport-Stream input No power supply or batteries required

DTA-2180 – DekTec H.264/MPEG-2 HD/SD Encoder for PCIe

Video encoding: 480i, 576i, 720p, 1080i, 1080p
Video Inputs: HDMI and HD/SD-SDI
Audio encoding: MPEG-1 Layer II, AAC, Dolby Digital
Output: ASI, IP

DTA-2137C – DekTec Dual DVB-S/S2 Receiver for PCI Express Bus

Professional-grade dual-channel DVB-S/S2 receiver
Supports 32APSK, MIS, GS, VCM, ACM
DVB-ASI monitoring on each channel

DTA-2162 – DekTec Advanced Network Card with Dual GigE Ports

Two GigE network ports with hardware acceleration for rock-solid streaming of 100+ simultaneous DTV signals.
Advanced hardware-based IPv4 and IPv6 address matcher to offload the driver.
Dedicated packet-scheduling engine to stream over IP with minimal jitter.
PCI Express x4; Low profile

DTU-236A – DekTec 8-VSB / QAM-A/B/C RF Probe and ASI Input for USB-2

Light-weight, easy-to-use RF adapter for tuning to any UHF/VHF or cable channel in the 44 to 1002 MHz range.
Support for all QAM variants. Capture TS signals directly to file on a laptop PC via USB-2 for easy field recording

DTA-2138B – DekTec DVB-C2/DVB-T2/ISDB-T Receiver for PCI Express

Dektec Digital Video Bv Network & Wireless Cards Drivers

Single-channel PCIe receiver. Supports DVB-T, DVB-T2, DVB-C, DVB-C2, ISDB-T.
Demodulation of all DVB-T2 modes, including single and multiple PLP, SISO and MISO.
Hardware-based demodulation with 0% CPU load.
Optimized for network monitoring.

DTA-2131 – DekTec Multi-Standard VHF/UHF Receiver for PCI Express

Universal receiver for VHF/UHF band.
Supports ATSC, ATSC3.0, DAB+, DVB-C, DVB-C2, DVB-T, DVB-T2, ISDB-T

DTA-2139 – DekTec Twelve-Channel QAM-A/B/C Receiver for PCI Express

Twelve-channel QAM receiver, PCI Express.Compliant with J.83 Annex A (DVB-C), B and C

DTA-2107 – DekTec Multi-Standard L-Band Modulator for PCI Express Bus

DVB-S/S2 modulator with L-band upconverter.
QPSK, 8PSK, 16APSK, 32APSK.
Options: ISDB-S and DAB modulation, I/Q samples, AWGN insertion

DTA-2152 – DekTec Dual-Port HD-SDI/ASI Adapter with Genlock

Dual-port HD/SD-SDI adapter for PCI Express with analogue genlock input.
Supports SD and HD.
Each SDI port can be confiured as input or output.
HD/SD-SDI recording and play-out

DTA-115 – DekTec Multi-Standard VHF/UHF Modulator for PCI Bus

Multistandard PCI based modulator: ATSC VSB, DVB-C, DVB-T / DVB-H, QAM (A/B/C), ADTB-T / DTMB, CMMB, DVB-T2, IQ, ISDB-T, DVB-C2.

DTA-2160 – DekTec GigE + 3x ASI/SDI ports for PCI Express

Gigabit Ethernet 10/100/1000 port.Three bi-directional DVB-ASI ports.Transcoding between ASI and TSoIP.
Transmission and reception of Transport Streams over IP networks. Download gestetner driver. IP jitter analysis.

DTA-2144B – DekTec Quad ASI/SDI Input/Output Adapter for PCI Express Bus

Quad ASI/SDI input/output adapter for PC-based applications that record, play and/or process MPEG-2 transport streams.
Four independent ASI/SDI ports: Input or Output (software selectable).
Each port can carry either DVB-ASI up to 214Mbps or full-frame 10-bit SDI

DTA-2136 – DekTec Dual QAM-A/B/C Receiver with ASI Monitoring Ports

Dual-channel QAM receiver, PCI Express.Compliant with J.83 Annex A (DVB-C), B and C. 2 ASI output ports for monitoring.

DTA-2145 – DekTec Multi-Purpose Dual ASI/SDI Adapter for PCI Express

Universal ASI/SDI input/output adapter for PC-based applications that record, play and/or process MPEG-2 transport streams.
Two independent ASI/SDI ports: Input + Output or Dual Output (software-selectable).
Each port can carry either DVB-ASI up to 214Mbps or full-frame 10-bit SDI

DTE-3100 – DekTec Networked DVB-ASI Output Adapter (IP-to-ASI Converter)

Standalone device that can act as a TSoIP to ASI gateway, or as remote I/O device for PC-based applications.

DTE-3120 – DekTec Networked DVB-ASI Input Adapter (ASI-to-IP Converter)

Standalone ASI to TSoIP gateway. Can be used with a computer for further capture and analysis.

DTA-2111 – DekTec Multi-Standard VHF/UHF Modulator for PCI Express

Multi-standard modulator for PCI Express with support for most QAM-, OFDM- and VSB-based modulation standards: ATSC VSB, DVB-C, DVB-T / DVB-H, QAM (A/B/C), ISDB-T, DTMB, CMMB, DVB-T2, DVB-C2.

DTE-3137 – DekTec Networked DVB-S/S2 Satellite Receiver

Standalone compact professional satellite DVB-S/S2 receiver supporting QPSK, 8-PSK, 16-APSK and 32-APSK. Full TS output on IP and DVB-ASI. LNB power insertion. Web and SNMP interface for setting parameters and observing status.

DTA-112 – DekTec ATSC / QAM / DVB-T Modulator with VHF/UHF Upconverter for PCI Bus

Cost-effective PCI based modulator with support for ATSC, DVB-C, QAM-A/B/C and DVB-T. All-channel upconverter 47 . 862MHz covering entire VHF and UHF band. Supports all constellations and modulation modes for each supported standard. Bi-directional DVB-ASI port

DTA-105 – DekTec Dual DVB-ASI Output Adapter for PCI Bus

Low-profile PCI card with two independent DVB-ASI outputs. Can be used as a general-purpose output adapter for PC-based applications that generate an MPEG-2 transport stream. MPEG-2 transport-stream test generator

DTA-107S2 – DekTec DVB-S/S2 Modulator with L-Band Upconverter for PCI Bus

Satellite modulator compliant to DVB-S as defined in ETS 300 421 and to DVB-S2 as defined in ETS 302 307.
Integrated L-Band Upconverter with on-board 950 . 2150-MHz synthesiser

DTA-107 – DekTec DVB-S Modulator with L-Band Upconverter for PCI Bus

Satellite modulator compliant to DVB-S as defined in ETS 300 421 with Integrated L-Band Upconverter with on-board 950 . 2150-MHz synthesiser
Wide range of symbol rates allows for both MCPC and SCPC operation

DTE-3114 – DekTec Standalone four-channel QAM Modulator with IP inputs

Dektec Digital Video Bv Network & Wireless Cards Drivers

Standalone four-channel QAM modulator with TS-over-IP (TSoIP) inputs and directly synthesized VHF/UHF outputs

DTU-245 – DekTec FantASI USB-2 ASI / SD-SDI Input+Output Adapter

Convenient, compact USB adapter that can be used to capture and generate MPEG-2 transport streams (DVB-ASI) and uncompressed serial digital video (SDI).

DTU-215 – DekTec USB-2 VHF/UHF multi-standard modulator

DTU-215 is a USB-2 based multi-standard modulator with support for most QAM-, OFDM- and VSB-based modulation standards. Including DVB-T/H, DVB-C, DVB-C2, ATSC, ISDB-T, DTMB, CMMB, IQ, and more.